9230 Simplify Adapter & Charger Automatic Test System
9230 Simplify Adapter & Charger Automatic Test System
| MODEL | 9230 | ||
| Programmable DC Electronic Load (EXTECH 5130) | |||
|---|---|---|---|
| Capacity | 60V/60A/300W | ||
| Range | Resolution | Accuracy | |
| CC Mode | 0-6A / 0-60A | 1.5mA / 15mA | 0-6A: ±(0.1% of Setting + 0.1% F.S) 0-60A: ±(0.1% of Setting + 0.1% F.S) under 100W |
| CR Mode | 1-4KΩ/ 1-25mΩ | 0.25m (1/Ω) / 0.25mΩ | ±(0.2% of Setting + 0.2% F.S.) |
| CV Mode | 1-60V | 15mV | ±(0.05% of Setting + 0.1% F.S.) |
| Dynamic Mode | Thigh / TLow 0.025mS-10mS / 1mS-20S | ||
| Operation | Slew Rate 1mA-250mA/μS, 0.01A-2.5A/μS | ||
| Protection | OCP, OPP, OVP, OTP, REV | ||
| Programmable AC Power Source (EXTECH 6610) | |||
| Power Rating | 1000VA | ||
| Output Voltage, AC | 0-300V Auto Range | ||
| Max AC output Current(RMS) | 4.6A High Voltage Range / 9.2A Low Voltage Range | ||
| Max AC output Current(PEAK) | 13.8A High Voltage Range / 27.6A Low Voltage Range | ||
| Output Frequency | Range: 45-500HZ, Resolution: 0.1HZ, Accuracy: 0.03% of setting | ||
| Harmonic Distortion | THD<0.5% at 45-500Hz (Resistive Load) | ||
| Load Regulation | ≒0.5% at Resistive Load | ||
| Start / End Phase Angle | 0-360° Resolution: 1, Accuracy: 1 (45-65HZ) | ||
| Oscilloscope (GOODWILL 2062) | |||
| Bandwidth limit | 20MHz (-3dB) | ||
| Sensitivity | 2mV/div ~ 5V/div (1-2-5 increments) | ||
| Accuracy | ±(3% x |Readout|+0.05 div x Volts/div+0.8mV) | ||
| Input Coupling | AC, DC & Ground | ||
| Input Impedance | 1MΩ±2%, ~16pF | ||
| System Controller | |||
| Controller | IPC P4 -2.0GHZ or Faster | ||
| Operational Environment | Windows XP with Excel XP | ||
| Interational Board | RS232 | ||